1/64 H8 double door Cattle car

Facebook TwitterGoogle Bookmarks
  • steve4
  • steve4's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
More
8 years 3 months ago #1 by steve4
1/64 H8 double door Cattle car was created by steve4
put my toe for the first time into NZR 1/64 water and I am already hooked... :dunno:


fair and square - I like low temperature soldering...

steve w.
Attachments:

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #2 by bikingmike
Replied by bikingmike on topic 1/64 H8 double door Cattle car
Hey Steve, quick question for ya - what are you using to prime your white metal kits before painting them?

Please Log in or Create an account to join the conversation.

  • steve4
  • steve4's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
More
8 years 2 months ago #3 by steve4
Replied by steve4 on topic 1/64 H8 double door Cattle car
Hi Mike,

after I got rid of all the flux residue from soldering and the bare metal is clean from any grease or oil I am using PollyScale CP gray, light gray or white if I paint the model with acryl or Floquil light gray if I use oil based paint. it is important that the model is really clean before you put a primer or underlay on, use gloves to touch the model after cleaning and the paint will stick to it and not chip off.

cheers...

steve w.

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #4 by bikingmike
Replied by bikingmike on topic 1/64 H8 double door Cattle car

steve4 wrote: Hi Mike,

after I got rid of all the flux residue from soldering and the bare metal is clean from any grease or oil I am using PollyScale CP gray, light gray or white if I paint the model with acryl or Floquil light gray if I use oil based paint. it is important that the model is really clean before you put a primer or underlay on, use gloves to touch the model after cleaning and the paint will stick to it and not chip off.

cheers...


Cheers Steve

And here's me thinking you'd be using some sort of fancy etch primer!

Cheers

Mike

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #5 by Bishop
Replied by Bishop on topic 1/64 H8 double door Cattle car
I love seeing how you guys put these together. I'm assuming that you solder because this is made of white metal? Or is it because it need the strength that CA can't provide? PE boxes for tanks etc are soldered for that reason obviously, so just wondering about this.

Amateur plastic surgeon!

Please Log in or Create an account to join the conversation.

Moderators: Tony LeeAndrewGary