- You are here:
-
Home
-
Forum
-
Modelling Forums
-
General Modelling
- What we're building...
What we're building...
4 years 11 months ago #1
by Hadley
In the build:
2x Possum Bourne Subaru rally cars
2x Lynx AH-7's
KA-50 Hokum
AH-1W Cobra
What we're building... was created by Hadley
Hey guys, thought this would be a cool idea
Post up any pics/comments, whether it's before you start, work in progress, completed, etc
It'll encourage more posts more often, without the need for its own thread
Kinda like the new acquisition thread cause that's always got lots to see
Post up any pics/comments, whether it's before you start, work in progress, completed, etc
It'll encourage more posts more often, without the need for its own thread
Kinda like the new acquisition thread cause that's always got lots to see
In the build:
2x Possum Bourne Subaru rally cars
2x Lynx AH-7's
KA-50 Hokum
AH-1W Cobra
Please Log in or Create an account to join the conversation.
4 years 11 months ago #2
by Glenn
Replied by Glenn on topic What we're building...
Good idea,will try and post up some photos of my projects that I have on the go,tomorrow
Please Log in or Create an account to join the conversation.
4 years 11 months ago #3
by gibbs
My little corner of the internet
Replied by gibbs on topic What we're building...
That'll be interesting I've got a big project coming up for over christmas I'm just waiting for some of the parts to arrive from Amazon and have got to decide on the final 3 parts
My little corner of the internet
Please Log in or Create an account to join the conversation.
4 years 11 months ago #4
by Grant
Replied by Grant on topic What we're building...
I'm building a Walthers ready mix plant for my HO layout.
Please Log in or Create an account to join the conversation.
4 years 11 months ago #5
by Gary
'Yea, Though I Fly Through the Valley of the Shadow of Death, I Shall Fear No Evil. For I am at 50,000 Feet and Climbing.'
Replied by Gary on topic What we're building...
I'm building the following right now
Haseagawa 1/32 ME109 Trop,
Tamiya 1/48 ME109 Trop,
1/72 Hasegawa B-25,
Trumpeter 1/35 Ferdinand
Tasca Sherman Firefly
Revell/Squadron 1/275 USS Olympia (not far off being done)
Also just finishing a Trumpeter 1/35 KV2,
Haseagawa 1/32 ME109 Trop,
Tamiya 1/48 ME109 Trop,
1/72 Hasegawa B-25,
Trumpeter 1/35 Ferdinand
Tasca Sherman Firefly
Revell/Squadron 1/275 USS Olympia (not far off being done)
Also just finishing a Trumpeter 1/35 KV2,
'Yea, Though I Fly Through the Valley of the Shadow of Death, I Shall Fear No Evil. For I am at 50,000 Feet and Climbing.'
Please Log in or Create an account to join the conversation.
4 years 11 months ago #8
by grover
Kane
On the Bench - Zvezda Star Destroyer
Replied by grover on topic What we're building...
This is what I'm working on at the moment. A youth studio in Lami, Fiji.
Kane
On the Bench - Zvezda Star Destroyer
Please Log in or Create an account to join the conversation.
4 years 11 months ago #9
by Gary
'Yea, Though I Fly Through the Valley of the Shadow of Death, I Shall Fear No Evil. For I am at 50,000 Feet and Climbing.'
Replied by Gary on topic What we're building...
Oh that's just stuff I'm actively working on it doesn't include the stuff I've put to one side while I wait for a skill upgrade, I often start stuff and find that I need to work on a particular skill set (like PE or a particular German paint scheme for example) so I wait until I've tried it on something smaller or of a lower quality and then return to it sometimes months later.
'Yea, Though I Fly Through the Valley of the Shadow of Death, I Shall Fear No Evil. For I am at 50,000 Feet and Climbing.'
Please Log in or Create an account to join the conversation.
4 years 11 months ago - 4 years 11 months ago #10
by gibbs
My little corner of the internet
Replied by gibbs on topic What we're building...
I've not touched the puma in months as it's back home, so I've been working on various assignments and looked at some potential improvements on the scale calculator that I could do.
I've also been working on getting the components for the Christmas project I'm nearly there just 2 more parts to go I just wish the parts where cheaper I ordered one of the parts tonight and that set me back £250 I'm just glad thats the most expensive piece
I've also been working on getting the components for the Christmas project I'm nearly there just 2 more parts to go I just wish the parts where cheaper I ordered one of the parts tonight and that set me back £250 I'm just glad thats the most expensive piece
My little corner of the internet
Please Log in or Create an account to join the conversation.
4 years 11 months ago #12
by olive drab
Replied by olive drab on topic What we're building...
NZ Staghound just waiting for the stowage sets to arrive.
Dragon 234/1.Interior hull done and wheels set to turn. Can be done.
LRDG truck with 20mm Italian cannon fitted on the deck. With AC models crew and Resicast stowage, conversion kit.
Holiday project the last of the landscaping on a 1 to 1 scale!
Dragon 234/1.Interior hull done and wheels set to turn. Can be done.
LRDG truck with 20mm Italian cannon fitted on the deck. With AC models crew and Resicast stowage, conversion kit.
Holiday project the last of the landscaping on a 1 to 1 scale!
Please Log in or Create an account to join the conversation.
4 years 11 months ago #13
by Webby_NZ
Stand aside caffine, this is a job for alcohol.
Remember to subscribe at www.plamo.nz for latest news, updates and sales. Use KM5 for 5% off your purchase.
Don't forget to mention you found the site via KM so I can give back to the site.
Replied by Webby_NZ on topic What we're building...
Nice idea for a thread.
Im currently working on a bandai kit from the anime Tiger and Bunny that I started ages ago and want to get the big box out of the way.
Most recent completes that I have not had time to do posts on are 2 very different sizes.
Bandai Re100 Nightingale, has since undergone a repaint, just needs final detials/panel lines done
and a Scribor Miniatures Treeman to have a dabble in Miniature painting.
Next project is reassembling the workbench area after finding the main phone jack in the house was in the back corner of it and needing a chorus dude to get at it :-/
And setting up the Brother Scan cut somewhere that makes the wife feel it was actually for the 2 of us
Im currently working on a bandai kit from the anime Tiger and Bunny that I started ages ago and want to get the big box out of the way.
Most recent completes that I have not had time to do posts on are 2 very different sizes.
Bandai Re100 Nightingale, has since undergone a repaint, just needs final detials/panel lines done
and a Scribor Miniatures Treeman to have a dabble in Miniature painting.
Next project is reassembling the workbench area after finding the main phone jack in the house was in the back corner of it and needing a chorus dude to get at it :-/
And setting up the Brother Scan cut somewhere that makes the wife feel it was actually for the 2 of us
Stand aside caffine, this is a job for alcohol.
Remember to subscribe at www.plamo.nz for latest news, updates and sales. Use KM5 for 5% off your purchase.
Don't forget to mention you found the site via KM so I can give back to the site.
Please Log in or Create an account to join the conversation.
4 years 11 months ago #15
by Kiwidave4
Replied by Kiwidave4 on topic What we're building...
Unusually for me I have three on the go. The Centurion BARV I posted in armour last week which I am currently prepping for paint.
An RASC DUKW based on the Italeri kit which I have been painting/decalling on and off for the last six months! Here it is prior to painting.
And an Accurate Armour Conqueror, which I have attempted to start twice and aborted due to the extremely poor casting quality which is necessitating much scratchbuilding....and while scratchbuilding is what I do, its not what I expect of a kit I have paid a huge pile of coin for.
The last pic I took shows it next to a Tamiya T55 which I finished about a year ago!
An RASC DUKW based on the Italeri kit which I have been painting/decalling on and off for the last six months! Here it is prior to painting.
And an Accurate Armour Conqueror, which I have attempted to start twice and aborted due to the extremely poor casting quality which is necessitating much scratchbuilding....and while scratchbuilding is what I do, its not what I expect of a kit I have paid a huge pile of coin for.
The last pic I took shows it next to a Tamiya T55 which I finished about a year ago!
Please Log in or Create an account to join the conversation.
4 years 11 months ago - 4 years 11 months ago #16
by Maarten
'' I could sense things were about to kick off, so I got out of there !''
Replied by Maarten on topic What we're building...
This one,
'' I could sense things were about to kick off, so I got out of there !''
Please Log in or Create an account to join the conversation.
4 years 11 months ago #17
by Hadley
In the build:
2x Possum Bourne Subaru rally cars
2x Lynx AH-7's
KA-50 Hokum
AH-1W Cobra
Replied by Hadley on topic What we're building...
Got started on the Lynx last night...straight away this is one of the better looking kits I've seen.
The cleanness of the sprues is obvious, and the detail should be awesome as there are so many parts
This is the most detailed instrument panel I've done, most are usually just one decal, maybe two, this one had five
The cleanness of the sprues is obvious, and the detail should be awesome as there are so many parts
This is the most detailed instrument panel I've done, most are usually just one decal, maybe two, this one had five
In the build:
2x Possum Bourne Subaru rally cars
2x Lynx AH-7's
KA-50 Hokum
AH-1W Cobra
Please Log in or Create an account to join the conversation.
4 years 11 months ago #20
by Hadley
In the build:
2x Possum Bourne Subaru rally cars
2x Lynx AH-7's
KA-50 Hokum
AH-1W Cobra
Replied by Hadley on topic What we're building...
Where's the pics of the seasprite?Woadism wrote: In a week or so, I forget the exact date, but I will be building one thing and one thing only - my Skyhawk Group Build entry! At the moment though...
Revell 1/32 BAe Hawk T.1A
ProModeler 1/48 PBY-5A Catalina
Hasegawa 1/32 P-40N Warhawk
Italeri 1/48 Douglas A-20B
Hasegawa 1/32 A-4E/F Skyhawk (a different one, really old boxing)
Airfix 1/24 Hurricane MKI
Airfix 1/24 Gr.3 Harrier
ProModeler 1/32 Ju 88A-1
Revell 1/48 SH-2F Seasprite
Academy 1/48 F-117A
Tamiya 1/32 F-4J Phantom
Trumpeter 1/24 Bf 109 G-6
Hasegawa 1/32 Ki84 (Frank)
Fujimi 1/24 Nissan Skyline
PCM 1/32 Spitfire Mk XIVc
There are a few more that I've done a little on, but are proper stored away so it wouldn't be fair to say I'm "building" them but all of these are getting a bit of attention now and then as the mood strikes. Writing out that list felt a little... obsessed...
In the build:
2x Possum Bourne Subaru rally cars
2x Lynx AH-7's
KA-50 Hokum
AH-1W Cobra
Please Log in or Create an account to join the conversation.
4 years 11 months ago #21
by RossMack
This email address is being protected from spambots. You need JavaScript enabled to view it.
r-mcarthur.wix.com/717squadron# !
There are two types of aircraft: fighters and targets
On the bench:
Esci A-1H, I.D. Models 1/72 Andover vac, Testors 1/72 Harrier, Hasegawa 1/72 F-15D
Replied by RossMack on topic What we're building...
Hmmm . . think I'll play, too.
Organising one or two kits, last details.
Spit Mk Vb, converted from Revell 1/72 Mk iia.
Rigging a Monogram 1/72nd F-11C
Filling in panel lines on a Frems MB 339.
1/48th Occidental Spit Mk IXc
1/23nd Revell F4U-1 in FAA clothes
and . . .
1/32nd Revell F-14B
Wasn't happy with the U/C and gear wells. Here's a little on the NLG:
Organising one or two kits, last details.
Spit Mk Vb, converted from Revell 1/72 Mk iia.
Rigging a Monogram 1/72nd F-11C
Filling in panel lines on a Frems MB 339.
1/48th Occidental Spit Mk IXc
1/23nd Revell F4U-1 in FAA clothes
and . . .
1/32nd Revell F-14B
Wasn't happy with the U/C and gear wells. Here's a little on the NLG:
This email address is being protected from spambots. You need JavaScript enabled to view it.
r-mcarthur.wix.com/717squadron# !
There are two types of aircraft: fighters and targets
On the bench:
Esci A-1H, I.D. Models 1/72 Andover vac, Testors 1/72 Harrier, Hasegawa 1/72 F-15D
Please Log in or Create an account to join the conversation.
4 years 11 months ago #22
by Woadism
SO - prior explanation, I'm making this for someone who works with seasprite engineers, and wants to put this on their desk as somewhat of a taunt... by painting it vivid pink!
It's the old Revell kit, and it's a bit of a grotter, and the pink Tamiya paint has been pretty atrocious... but still a hilarious build - will almost certainly get a G kit if Kittyhawk do put out an RNZAF set.
Replied by Woadism on topic What we're building...
Where's the pics of the seasprite?
SO - prior explanation, I'm making this for someone who works with seasprite engineers, and wants to put this on their desk as somewhat of a taunt... by painting it vivid pink!
It's the old Revell kit, and it's a bit of a grotter, and the pink Tamiya paint has been pretty atrocious... but still a hilarious build - will almost certainly get a G kit if Kittyhawk do put out an RNZAF set.
Please Log in or Create an account to join the conversation.
4 years 11 months ago #24
by Glenn
Replied by Glenn on topic What we're building...
A wee Dio I am working on,yes more water
A DML panzer III Sig
And some new kits that will be on the bench soon
A DML panzer III Sig
And some new kits that will be on the bench soon
Please Log in or Create an account to join the conversation.
4 years 11 months ago #25
by gibbs
My little corner of the internet
Replied by gibbs on topic What we're building...
I've finally got all the bits ordered for the project, I do wish that it hadn't cost as much as it did but the bits are ordered now so I'm ready to start on this when I go home for christmas
My little corner of the internet
Please Log in or Create an account to join the conversation.
4 years 11 months ago #27
by Webby_NZ
Stand aside caffine, this is a job for alcohol.
Remember to subscribe at www.plamo.nz for latest news, updates and sales. Use KM5 for 5% off your purchase.
Don't forget to mention you found the site via KM so I can give back to the site.
Replied by Webby_NZ on topic What we're building...
Cleared the bench yesterday as I knew these were arriving.
First will be Vader, then im not sure.
All I can say is, I am not dissapointed in what Bandai has put in the box, the detail is comparable, and in some cases exceeds the same scale Fine Molds kits.
The true test will be the panel gaps once assembled.
First will be Vader, then im not sure.
All I can say is, I am not dissapointed in what Bandai has put in the box, the detail is comparable, and in some cases exceeds the same scale Fine Molds kits.
The true test will be the panel gaps once assembled.
Stand aside caffine, this is a job for alcohol.
Remember to subscribe at www.plamo.nz for latest news, updates and sales. Use KM5 for 5% off your purchase.
Don't forget to mention you found the site via KM so I can give back to the site.
Please Log in or Create an account to join the conversation.
Moderators: Tony Lee, Andrew, Gary